Aztek, Inc
Aztek Site Map   AZTEK on facebook        


Product Specifications  
Scanning Area   12” x 12” (304mm x 304mm)
Scanning Principle Single pass with 3 independent photo multipliers and aperture light path control
Spot Size 18 sizes, starting at 3 microns or 3 thousandth of mm
Capture Fidelity All scans are 16-bit separate RGB output
Optical Step Resolutions Twenty steps:  16,000 x 8,000; 80002, 40002, 32002, 2,6662, 20002, 16662, 13332, 11422, 10002, 8882, 7272, 6152, 5002, 4002, 3202, 2502, 2002, 1002, 802
Interpolated Resolution 64,000 dpi bi-cubic interpolation in increments of 1 dpi
Scaling (at 300 dpi) 2,666 % optical or up to 21,333 % bi-cubic interpolated
Maximum File Size 96 GB 48-bit
Original Media Types Transparencies (positive and negative), reflective, unframed slides, printed material and half-tone screened films
Scan Modes RGB and CMYK density, RGB log, gray-tone, ICC/ICM
File Formats TIFF 8, 16, 24, and 48-bit RGB; CMYK and Gray; PSD; Loss-Less; WMF; BMP
Industry* Dmax 5.9*
Actual Optical Density ANSI / ISO Status A Density between .02 Dmin and 3.88 Dmax
Workflow Density and ICM / ICC color management tagging and conversion
Platform Requirements

PC with:  Windows 98, ME, 2000, XP, VISTA, 7; 4GB RAM; 80GB or greater hard drive; SCSI; 500MHz or greater Intel processor



Light Source Two halogen photo optic lamps
Electrical Requirements 120/240 Vac, 50/60 HZ (automatic voltage selection)
Weight 168 lbs (76.2 kg)
Premier Mounting Kit Mounting station, second removable drum, film mounting fluid, cleaning fluid, cloths, tape and acetate
Additional Drums Separately available
Software AZTEK Digital PhotoLab Pro
AZTEK Scan Server Pre-configured scanning and image computer server
Services Training, installation, calibration support, and full service maintenance
*Scanner industry specifications are provided only for comparison purposes.  Please refer to actual optical performance.